The data loggers can be used for various application within the life scrunch and food and beverage industries.
When used with our 8 Bar Pressure Sensor, the following application(s) are covered:
Pressure Range of
20 mBar to 8 Bar
Live Data Option Available
Interchangeable Sensor Design
TrackSense Pro Wireless Data Logger
8 Bar Pressure Sensor
The 8 Bar Pressure Sensor has a pressure range of 20 mBar to 8 Bar Absolute, with a measuring accuracy of ± 0.25% Full scale. It can be used within the food, pharmaceutical and medical industries, for applications like retort sterilization, steam sterilization, ovens, environmental chambers etc.
The high quality wireless TrackSense Pro data loggers consist of high resistant stainless steel and offers high-end technology that allows for stable and highly accurate measurements within different thermal processes.
The TrackSense Pro data logger series are equipped with an Interchangeable sensor option, unlocking several measuring parameters:
✓ Temperature
✓ Pressure
✓ Conductivity
✓ Relative humidity
✓ Vacuum
✓ Steam Penetration
The data loggers can easily be activated and read by the Multi reader station and combined with the Sky module for real time data via wireless communication.
Key Features and Benefits
One logger - multiple sensor options
21 CFR Part 11 Compliant
Real time data with the SKY module
User-friendly validation software
Usable with E-Val Pro thermocouple system
Sensor with this logger configuration:
8 Bar Pressure Sensor
Pressure Measuring Range:
20 mBar to 8 Bar ABS (Calibrated 0 to +140 °C)
Measuring Principle:
Piezoresistive
Sensor Element:
Strain Gauge
Measuring Accuracy:
± 0.25% Full Scale
Logger with this sensor configuration:
Pro 3G
Operating Pressure:
0.001 mBar to 10 Bar ABS
Operating Temperature:
-20 to +150 °C
House Material:
316 L Stainless Steel
Diameter:
25 mm
Length:
44 mm
Weight With Battery:
48 Grams
Memory Capacity:
120,000 Data Points / 60,000 Samples
Minimum Sample Rate:
0.33 Second
Maximum Sample Rate:
24 Hours
Maximum Start Delay:
14 Days
Intrinsically Safe:
Ex II1GD Ex ia IIC T3 Ga, -50 °C ≤ Tamb ≤ +105 °C
Time Accuracy:
± 5 Seconds Per 24 Hours
Battery:
Please Note: If equipment is used in ATEX environment, special conditions for safe use stated in ATEX certificates section 17 must be considered.
The ValSuite® Software
ValSuite is our reputable validation and calibration software. This intuitive software combines all our equipment systems into a single platform. Thereby opening the door to a vast amount of new possibilities by allowing you to combine data loggers with the traditional thermocouple systems.
We offer multiple versions of ValSuite to meet your exact needs. Most notably ValSuite Pro, our FDA 21 CFR Part 11 compliant software that ensures full data integrity.
ValSuite offers features like customized reports with clear pass/fail criteria, test templates, data analysis, monitoring, live data and much more. ValSuite is developed according to GAMP principles and is available in multiple languages for Windows 7, 8 and 10 (32/64-Bit). ValSuite is availabe in four generic versions: ValSuite Basic, ValSuite Medical, ValSuite Plus and ValSuite Pro.
Highlighted Features
Suitable Applications
Ellab Applications
Ellab provides a wide range of diverse products and solutions for the pharmaceutical, medical and food industries all around the world.
See all applicationsSuitable Accesories
Ellab offers a wide range of customizable fittings and essential accessories for processes and studies within different industries. By using one of our unique fittings, loggers can be applied to hard-to-reach areas, cold spots and other critical measuring points.
Ellab Accesories
Ellab offers a wide range of customizable fittings and essential accessories for processes and studies within different industries.
See all Accesories