The data loggers can be used for various applications within the life science and food & beverage industries.
When used with our Double Semi Flexible High Temperature Sensor, the following application(s) are covered:
Temperature Range of
0 to +400 °C
Live Data Option Available
Interchangeable Sensor Design
TrackSense Pro X Wireless Data Logger
Double Semi Flexible High Temperature Sensor
The Double Semi Flexible High Temperature Sensor has a temperature range of 0 to +400 °C with an unmatched accuracy of 0.5 °C (in range 0 to +400 °C). It can be used for various application, but is ideal for high temperature applications within the pharmaceutical industry, such as depyrogenation and ovens.
The high quality wireless TrackSense Pro X data loggers consist of high resistant stainless steel and offers high-end technology that allows for stable and highly accurate measurements within different thermal processes.
The TrackSense Pro X data logger series are equipped with an Interchangeable sensor option, unlocking several measuring parameters:
✓ Temperature
✓ Pressure
✓ Conductivity
✓ Relative humidity
✓ Vacuum
✓ Steam Penetration
The data loggers can easily be activated and read by the Multi reader station and combined with the Sky module for real time data via wireless communication.
Key Features and Benefits
One logger - multiple sensor options
21 CFR Part 11 Compliant
Real time data with the SKY module
User-friendly validation software
Usable with E-Val Pro thermocouple system
Sensor with this logger configuration:
Double Semi Flexible High Temperature Sensor
Temperature Measuring Range:
0 to +400 °C (>150 °C using Thermal Barrier)
Measuring Principle:
Electrical Resistance
Sensor Element:
Pt1000
Diameter:
2 mm
Length:
150 – 1.000 mm
Position of Measuring Point from Tip:
3 mm
Temperature Accuracy:
0 to +400 °C:
± 0.5 °C
Sensor Response Time:
T-63%:
1.5 Second
T-90%:
2.9 Seconds
Logger with this sensor configuration:
Pro X 3G
Operating Temperature:
0 to +400 °C (>150 °C using Thermal Barrier)
Operating Pressure:
0.001 mBar to 10 Bar ABS
House Material:
316L Stainless Steel
Diameter:
25 mm
Length:
44 mm
Weight With Battery:
48 Grams
Memory Capacity:
120,000 Data Points / 60,000 Samples
Minimum Sample Rate:
1 Second
Maximum Sample Rate:
24 Hours
Maximum Start Delay:
14 Days
Intrinsically Safe:
Ex II1GD Ex ia IIC T3 Ga, -60 °C ≤ Tamb ≤ +105 °C
Time Accuracy:
± 5 Seconds Per 24 Hours
Battery:
Please Note: If equipment is used in ATEX environment, special conditions for safe use stated in ATEX certificates section 17 must be considered.
The ValSuite® Software
ValSuite is the industry leading validation and calibration software, which is highly attributed to the countless reporting options, impenetrable data integrity, user-calibration options and data analysis features.
The software is used to run all Ellab hardware and can combine various measuring systems to the same study. In addition to its wide range of features, ValSuite is also FDA 21 CFR Part 11 compliant and designed in accordance with GAMP guidelines.
Features and Benefits:
✓ FDA 21 CFR Part 11 compliant
✓ Safe and reliable
✓ Windows security option
✓ Compatible with Windows 10
✓ Available in several languages
✓ Suitable for all sorts of applications
✓ Multiple reporting options
And much more…
Highlighted Features
Suitable Applications
Ellab Applications
Ellab provides a wide range of diverse products and solutions for most applications, all around the world.
See all applicationsSuitable Accessories
Ellab offers a wide range of customizable fittings and essential accessories for processes and studies within different industries. By using one of our unique fittings, loggers can be applied to hard-to-reach areas, cold spots and other critical measuring points.
Ellab Accessories
Ellab offers a wide range of customizable fittings and essential accessories for processes and studies within different industries.
See all Accessories