The data loggers can be used for various applications within the life science and food and beverage industries. When used with our Semi Flexible Temperature Sensor, the following applications are covered:
Temperatures Range of
-30 to +105 °C
Live Data Option Available
Interchangeable Sensor Design
TrackSense Pro Basic Wireless Data Logger
Semi Flexible Temperature Sensor
The Semi Flexible Temperature Sensor has a temperature range of -30 °C to +105 °C with an accuracy of ± 0.1 °C (in range -30 °C to +105 °C). It can be used for various applications within the pharma and food industries, and can be equipped with either a round, sharp or conical shaped tip.
The high quality wireless TrackSense Pro Basic data loggers consist of high resistant stainless steel and offers high-end technology that allows for stable and highly accurate measurements within different thermal processes.
The TrackSense Pro data logger series are equipped with an Interchangeable sensor option, unlocking several measuring parameters:
✓ Temperature
✓ Pressure
✓ Conductivity
✓ Relative humidity
✓ Vacuum
The data loggers can easily be activated and read by the Multi reader station and combined with the Sky module for real time data via wireless communication.
Sensor Options
Key Features and Benefits
One logger - multiple sensor options
21 CFR Part 11 Compliant
Real time data with the SKY module
User-friendly validation software
Usable with E-Val Pro thermocouple system
Sensor with this logger configuration:
Semi Flexible Temperature Sensor
Temperature Measuring Range:
-30 to +105 °C
Measuring Principle:
Electrical Resistance
Sensor Element:
Pt1000
Diameter:
1.5 / 2 mm
Length:
100 – 1,000 mm
Position of Measuring Point from Tip:
3 mm
Accuracy:
-30 to +105 °C:
± 0.1 °C
Sensor Response Time:
T-63%:
0.6 / 0.4 Second
T-90%:
0.7 / 0.8 Second
Logger with this sensor configuration:
Pro Basic 3G
Operating Temperature:
-30 to +105 °C
Operating Pressure:
0.001 mBar to 10 Bar ABS
House Material:
316 L Stainless Steel
Diameter:
25 mm
Length:
44 mm
Weight With Battery:
48 Grams
Memory Capacity:
120,000 Data Points / 120,000 Samples
Minimum Sample Rate:
1 Second
Maximum Sample Rate:
24 Hours
Maximum Start Delay:
14 Days
Intrinsically Safe:
Ex II1GD Ex ia IIC T3 Ga, -30 °C ≤ Tamb ≤ +105 °C
Time Accuracy:
± 5 Seconds Per 24 Hours
Battery:
Please Note: If equipment is used in ATEX environment,
special conditions for safe use stated in ATEX certificates
section 17 must be considered.
The ValSuite® Software
ValSuite is the industry leading validation and calibration software, which is highly attributed to the countless reporting options, impenetrable data integrity, user-calibration options and data analysis features.
The software is used to run all Ellab hardware and can combine various measuring systems to the same study. In addition to its wide range of features, ValSuite is also FDA 21 CFR Part 11 compliant and designed in accordance with GAMP guidelines.
Features and Benefits:
✓ FDA 21 CFR Part 11 compliant
✓ Safe and reliable
✓ Windows security option
✓ Compatible with Windows 10
✓ Available in several languages
✓ Suitable for all sorts of applications
✓ Multiple reporting options
And much more…
Highlighted Features
One software platform for all Ellab equipment
Combine TrackSense data loggers and the E-Val Pro wired thermocouple system in the same session
Automatic PDF report generation with clear pass/fail indication
Can run from a stand-alone PC or networked
Suitable Applications
Life Science
Cold Storage
Cold Storage is used to avoid further biological activity such as decay in food and medical products. The critical parameter during storage is temperature, but often humidity is also monitored for dry conditions.
Life Science
Environmental Test Chamber
Environmental test chambers are suitable for numerous applications: product shelf life, stability and package testing, light exposure and temperature evaluation studies, electronic component burn-in, plant growth, and many more.
They feature precise control of parameters such as temperature and relative humidity.
Life Science
EtO Sterilization
Ethylene Oxide Sterilization is a low-temperature process used in the pharmaceutical and medical industries to reduce the levels of infectious agents. This process is preferred for products that cannot withstand the heat of typical autoclave sterilization. Critical parameters include temperature, humidity and pressure levels.
Life Science
H2O2 Sterilization
Hydrogen Peroxide Sterilization is a low-pressure, low-temperature, nontoxic process used in the pharmaceutical and medical industries to reduce the levels of infectious agents. This process is preferred for products that either cannot withstand the heat of typical autoclave sterilization or that have diffusion-restricted spaces such as low lumen medical devices.
Critical parameters include pressure/vacuum, delivered RF energy, H2O2 concentration and temperature. Humidity may also be measured.
Life Science
Incubation
In microbiology an incubator is a device for controlling temperature, humidity, and other conditions under which a microbiological culture is being grown.
More advanced incubators may have the ability to lower the temperature (via refrigeration), and/or the ability to control humidity or CO2 levels. This feature is specifically designed for cell growth.
Life Science
Stability Chamber
Stability Chambers in the pharmaceutical and medical industries rely heavily on validating critical temperature and humidity parameters in order to accurately measure the effect of these variables on individual drug products. This can help establish vital product degradation information.
Life Science
Warehouse
Warehouse environments in the pharmaceutical, medical, and food industries may be subject to regulatory compliance, requiring validation and monitoring.
Temperature and humidity are the most common critical parameters, which cannot exceed certain limit values and need to be accurately documented.
Food and Beverages
Cold Storage
Cold Storage is used to avoid further biological activity such as decay in food and medical products. The critical parameter during storage is temperature, but often humidity is also monitored for dry conditions.
Food and Beverages
Warehouse
Warehouse environments in the pharmaceutical, medical, and food industries may be subject to regulatory compliance, requiring validation and monitoring.
Temperature and humidity are the most common critical parameters, which cannot exceed certain limit values and need to be accurately documented.
Ellab Applications
Ellab provides a wide range of diverse products and solutions for the pharmaceutical, medical and food industries all around the world.
See all applicationsSuitable Accesories
Ellab offers a wide range of customizable fittings and essential accessories for processes and studies within different industries. By using one of our unique fittings, loggers can be applied to hard-to-reach areas, cold spots and other critical measuring points.
Multi Reader Station
The TrackSense Pro Multi Reader Station is what starts, stops and reads Ellab’s data loggers. The light module can hold up to 4 data loggers at a time, or be extended through expansion modules to read 16 data loggers simultaneously.
The reader stations can be connected directly to the PC via USB or connect to larger-scale IT systems through the LAN connection, easily providing quick information and analysis wherever necessary.
Single Reader Station
The TrackSense Pro Single Reader Station allows for a simple and quick way of starting, stopping and reading data loggers.
The reader station can easily be connected directly to a PC, providing fast transfer of data to generate advanced analysis and reports
SKY Real-time Data Module
The SKY module is a easy plug-and-play real-time data module that allows TrackSense Pro and TrackSense Lab data loggers to transmit live data through wireless transmission.
Whether it is within sealed rooms or hostile environments, the SKY module will effortlessly continue transmitting valuable data.
TrackSense Pro Standard Battery
Ellab offers various high-end batteries for our wide range of wireless data loggers.
The Standard Battery is used for most of the TrackSense data logger sizes and can be stored for up to 10 years and activated whenever needed using the activator unit.
Ellab Accesories
Ellab offers a wide range of customizable fittings and essential accessories for processes and studies within different industries.
See all AccesoriesDownloads and Related Articles
Our new corporate video shows why we are a world leading provider of validation, qualification and calibration solutions
