The data loggers can be used for various applications within the life scrence and food and beverage industries. When used with our Temperature Thermocouple Sensor, the following application(s) is covered:
Temperature Range of
-30 to +62 °C
Live Data Option Available
Interchangeable Sensor Design
TrackSense Pro Basic L Wireless Data Logger
Temperature Thermocouple Sensor
Ellab’s unique Temperature Thermocouple Sensor (TC Sensor) now allows users worldwide to use thermocouples in conjunction with wireless data loggers. The Temperature Thermocouple Sensor is especially designed for applications that cause a lot of strain on sensors and require as little impact on samples as possible. A good example of said applications would be Lyophilization, also known as Freeze-drying.
The high quality wireless TrackSense Pro Basic L data loggers consist of high resistant stainless steel and offers high-end technology that allows for stable and highly accurate measurements within different thermal processes.
The TrackSense Pro data logger series are equipped with an Interchangeable sensor option, unlocking several measuring parameters:
✓ Temperature
✓ Pressure
✓ Conductivity
✓ Relative humidity
✓ CO2
✓ Vacuum
The data loggers can easily be activated and read by the Multi reader station and combined with the Sky module for real time data via wireless communication.
Sensor Options
Key Features and Benefits
One logger - multiple sensor options
21 CFR Part 11 Compliant
Real time data with the SKY module
User-friendly validation software
Can be steam sterilized
Replaceable thermocouple wires
Increased temperature range when using various type T thermocouples
Sensor with this logger configuration:
Temperature Thermocouple Sensor*
Temperature Measuring Range:
-30 to +62 °C (Calibrated from -60 to +60°C)
-30 to +85 °C when keeping the logger at ambient temperature
Measuring Principle:
Thermoelectric Effect
Sensor Element:
Thermocouple Type T
Accuracy:
± 0.3°C Calibrated
Position of Measuring Point from Tip:
0 mm
Cable Length:
10, 30, 50 or 100 cm
Cable Dimensions and Type:
0.55 x 0.95 mm type AWG30 with naked tip
Sensor Response Time:
T-63%:
0.03 Second
T-90%:
0.09 Second
Logger with this sensor configuration:
Pro Basic L 3G
Operating Temperature:
-30 to +85 °C
Operating Pressure:
0.0001 mBar to 4 Bar ABS
House Material:
316 L Stainless Steel
Diameter:
25 mm
Length:
68.8 mm
Weight With Battery:
80 Grams
Memory Capacity:
120,000 Data Points / 40,000 Samples
Minimum Sample Rate:
1 Second
Maximum Sample Rate:
24 Hours
Maximum Start Delay:
14 Days
Intrinsically Safe:
Not ATEX approved
Time Accuracy:
± 5 Seconds Per 24 Hours
Battery:
The ValSuite® Software
ValSuite is the industry leading validation and calibration software, which is highly attributed to the countless reporting options, impenetrable data integrity, user-calibration options and data analysis features.
The software is used to run all Ellab hardware and can combine various measuring systems to the same study. In addition to its wide range of features, ValSuite is also FDA 21 CFR Part 11 compliant and designed in accordance with GAMP guidelines.
Features and Benefits:
✓ FDA 21 CFR Part 11 compliant
✓ Safe and reliable
✓ Windows security option
✓ Compatible with Windows 10
✓ Available in several languages
✓ Suitable for all sorts of applications
✓ Multiple reporting options
And much more…
Highlighted Features
One software platform for all Ellab equipment
Combine TrackSense data loggers and the E-Val Pro wired thermocouple system in the same session
Automatic PDF report generation with clear pass/fail indication
Can run from a stand-alone PC or networked
Suitable Applications
Life science
Lyophilization
Freeze drying (or lyophilization) is a technique used to remove water from a solution to leave a dry ‘cake’ as an end product. The dry product is much more stable than a solution.
Ellab Applications
Ellab provides a wide range of diverse products and solutions for mist application, all around the world.
See all applicationsSuitable Accessories
Ellab offers a wide range of customizable fittings and essential accessories for processes and studies within different industries. By using one of our unique fittings, loggers can be applied to hard-to-reach areas, cold spots and other critical measuring points.
Multi Reader Station
The TrackSense Pro Multi Reader Station is what starts, stops and reads Ellab’s data loggers. The light module can hold up to 4 data loggers at a time, or be extended through expansion modules to read 16 data loggers simultaneously.
The reader stations can be connected directly to the PC via USB or connect to larger-scale IT systems through the LAN connection, easily providing quick information and analysis wherever necessary.
Single Reader Station
The TrackSense Pro Single Reader Station allows for a simple and quick way of starting, stopping and reading data loggers.
The reader station can easily be connected directly to a PC, providing fast transfer of data to generate advanced analysis and reports
SKY Real-time Data Module
The SKY module is a easy plug-and-play real-time data module that allows TrackSense Pro and TrackSense Lab data loggers to transmit live data through wireless transmission.
Whether it is within sealed rooms or hostile environments, the SKY module will effortlessly continue transmitting valuable data.
TrackSense Frigo 85L Battery
Ellab offers various high-end batteries for our wide range of wireless data loggers
LYO Fitting
The Lyo Shuttle fixture for lyophilizer vial loading systems comprises integrated holder for vials with various dimensions eg. ø16 x 40 mm together with Pro-X logger with SKY module as well as contact puck.
Ellab Accessories
Ellab offers a wide range of customizable fittings and essential accessories for processes and studies within different industries.
See all AccessoriesDownloads and Related Articles
Our new corporate video shows why we are a world leading provider of validation, qualification and calibration solutions
