The data loggers can be used for various applications within the life science and food & beverage industries.
When used with our High Range Conductivity and Temperature Sensor, the following application(s) are covered:
Wireless Controller
Hanwell Pro CR3
Signal receiver & processer
All data from the sensors is collected, processed and stored in the unit, transfer to the computer is automatic when the computer is running. When the computer is off-line the unit will back up data internally until the computer comes back on line where the automatic data transfer will recommence. The unit is normally located near the computer that is being used to monitor the data. An on-board 16 x 2 alpha-numeric LCD displays the system status. The controller base station also signals alarm conditions via the front panel LED’s (should any sensor measure above or below individual pre-set levels). The unit has an on-board relay that can be configured to drive external alarm devices where required.
Options
- Built in GSM* module for remote communications via the mobile phone network
- RS485 output* to drive Hanwell Pro MS1000 control cards for building control or data replication
- Modbus RTU Expansion* for interfacing to third party systems and BMS systems
Typical Applications
- Warehouse/Storage monitoring
- Interface to BMS systems
- Heating control
- Remote monitoring where there are no computers or networks *GSM, RS485 and Modbus are factory fitted options
Related Products
Key Features and Benefits
*RS485 output to drive Hanwell MS1000 control cards for building control or data replication
Complies with RoHS, EU directives and WEEE
Carries CE Marking
Instrumentation Specification
Dimension (Excl. ancillaries):
204 x 156 x 68mm
Weight:
1 kg
Power supply:
12v universal power supply
Case Material:
Powder coated extruded aluminium
Instrument operating range:
5°C to +40°C (non-condensing RH environment)
Storage temperature:
-20°C to +35°C
Clock accuracy (logging):
40ppm @ 25°C
Controller inputs
Radio sensors:
Narrow band FM radio
Controller outputs (CR3 Standard only)
MS1000 control RS485
Alarm relay via jack socket
Receiver instrument specifications
Frequency options:
A range of frequencies are available between 433-458 MHz. Country specific regulations apply
Dimensions:
100 x 100 x 50mm
Weight:
250 grams
Case material:
ABS
Instrument operating range:
5°C to +40°C (non-condensing RH
environment)
Storage temperature:
-40°C to +60°C
Clock accuracy (logging):
40ppm @ 25°C
CR3 functions
Display:
2×16 line alpha-numeric
Environmental rating:
IP54 for internal use only
Alarm indication:
Red LED (CR3 Standard only)
Comms indication:
Yellow LED
Status indication:
Green LED
Backup supply:
7.2v rechargable NiMH pack
Memory capacity:
49152 standard records
Note: Not applicable to CR3 Modbus
The Hanwell EMS Software
The Hanwell environmental monitoring software (EMS) can be used with Hanwell Pro and Hanwell IceSpy hardware to provide a secure and flexible tool for comprehensive data collection, analysis and immediate alarm notification.
Validatable software
Specifically for the pharmaceutical sectors, we provide comprehensive IQ and OQ protocols and custom protocols, where required. Trained engineers and distributors are available for smooth validation protocol execution.
EMS assists with national regulatory compliance requirements
GxP Guidelines, HACCP, FDA 21 CFR Part 11, EU GMP Annex 11, and ISO 22000 food standards
Highlighted Features
One software platform for all Hanwell equipment.
Single or multi-user access for small, medium or large monitoring needs.
Collect and display data from multiple environmental applications.
Display quick overview of sites and/or sensor groups specified by individual users.
Access interactive graphs, tables and plan views for detailed data analysis.
System validation to organisation requirements with full supporting IQ & OQ protocols.
View real-time data 24/7.
Immediate system, email and SMS alarm notification to user-defined personnel.
Generate automated reports or access data immediately and easily via the system.
Access critical information on your local PC, via the company intranet or network and via the internet.
View and interact with data and settings from anywhere in the world using commercially available browser based formats.
Suitable Applications
Life science
Washer Disinfector
Washer/disinfectors are used in medical, as well as pharmaceutical applications, to either prepare goods for future autoclaving.
For example surgery instruments to remove residues such as blood and protein or to disinfect (semi sterilize) goods for later use.
Ellab Applications
Ellab provides a wide range of diverse products and solutions for most applications, all around the world.
See all applicationsSuitable Accessories
Ellab offers a wide range of customizable fittings and essential accessories for processes and studies within different industries. By using one of our unique fittings, loggers can be applied to hard-to-reach areas, cold spots and other critical measuring points.
When used with our High Range Conductivity and Temperature Sensor, the following application(s) are covered:
Multi Reader Station
The TrackSense Pro Multi Reader Station is what starts, stops and reads Ellab’s data loggers. The light module can hold up to 4 data loggers at a time, or be extended through expansion modules to read 16 data loggers simultaneously.
The reader stations can be connected directly to the PC via USB or connect to larger-scale IT systems through the LAN connection, easily providing quick information and analysis wherever necessary.
Single Reader Station
The TrackSense Pro Single Reader Station allows for a simple and quick way of starting, stopping and reading data loggers.
The reader station can easily be connected directly to a PC, providing fast transfer of data to generate advanced analysis and reports
SKY Real-time Data Module
The SKY module is a easy plug-and-play real-time data module that allows TrackSense Pro and TrackSense Lab data loggers to transmit live data through wireless transmission.
Whether it is within sealed rooms or hostile environments, the SKY module will effortlessly continue transmitting valuable data.
TrackSense Pro Standard Battery
Ellab offers various high-end batteries for our wide range of wireless data loggers.
The Standard Battery is used for most of the TrackSense data logger sizes and can be stored for up to 10 years and activated whenever needed using the activator unit.
Ellab Accessories
Ellab offers a wide range of customizable fittings and essential accessories for processes and studies within different industries.
See all AccessoriesDownloads and Related Articles
Our EMS video to see how our comprehensive solutions work