The data loggers can be used for various application within the life scrunch and food and beverage industries.
When used with our Rigid Temperature Sensor, the following application(s) are covered:
Pressure ranges of
10 mBar to 6 Bar Absolute
Temperatures Range of
-20 to +140 °C
TrackSense Pro Micro Wireless Data Logger
Pressure and Temperature Sensor
The TrackSense® Pro Micro data logger with Pressure and Temperature Sensor has a measuring range of 10 mBar to 6 bar ABS, with an accuracy of ±0.25% full scale, and a temperature range of -20 to +140°C with a measuring accuracy of 0.05°C (in range-20 to +140 °C).It has been designed for applications that depend on size. Due to the diameter only being 15 mm, the Micro loggers are ideally suited for measurements inside packaging eg. in bottles or cans during pasteurization and sterilization cycles.
The high quality wireless TrackSense Pro Micro data loggers consist of high resistant stainless steel and offers high-end technology that allows for stable and highly accurate measurements within different thermal processes.
The data loggers can easily be activated and read by the Multi reader station.
Sensor Options
Key Features and Benefits
21 CFR Part 11 Compliant
User-friendly validation software
Usable with E-Val Pro thermocouple system
Can be placed inside containers
Small and compact
Sensor with this logger configuration:
Pressure and Temperature Sensor
Pressure Measuring Range:
10 mBar to 6 bar ABS
Measuring Principle:
Piezoresistive / Electrical Resistance
Sensor Element:
Strain Gauge / Pt1000
Accuracy:
± 0.25% Full Scale
Temperature Measuring Range
-20 to +140 °C
Temperature Accuracy:
± 0.05 °C
Temperature Response Time:
T-63%:
16 Seconds
T-90%:
37 Seconds
Operating Temperature:
-20 to +140 °C
Operating Pressure:
0 mBar to 10 Bar ABS
Material:
316L Stainless Steel
Volume:
5.1 cm³
Logger Diameter:
15 mm
Logger Height:
30 mm
Weight With Battery:
17.8 Grams
Memory Capacity:
30,000 Data Points / 10,000 Samples
Minimum Sample Rate:
1 Second
Maximum Sample Rate:
24 Hours
Intrinsically Safe:
Not ATEX approved
Battery:
The ValSuite® Software
ValSuite is the industry leading validation and calibration software, which is highly attributed to the countless reporting options, impenetrable data integrity, user-calibration options and data analysis features.
The software is used to run all Ellab hardware and can combine various measuring systems to the same study. In addition to its wide range of features, ValSuite is also FDA 21 CFR Part 11 compliant and designed in accordance with GAMP guidelines.
Features and Benefits:
✓ FDA 21 CFR Part 11 compliant
✓ Safe and reliable
✓ Windows security option
✓ Compatible with Windows 10
✓ Available in several languages
✓ Suitable for all sorts of applications
✓ Multiple reporting options
And much more…
Highlighted Features
One software platform for all Ellab equipment
Combine TrackSense data loggers and the E-Val Pro wired thermocouple system in the same session
Automatic PDF report generation with clear pass/fail indication
Can run from a stand-alone PC or networked
Suitable Applications
Life Science
Incubation
In microbiology an incubator is a device for controlling temperature, humidity, and other conditions under which a microbiological culture is being grown.
More advanced incubators may have the ability to lower the temperature (via refrigeration), and/or the ability to control humidity or CO2 levels. This feature is specifically designed for cell growth.
Life Science
Steam Sterilization
Autoclaves in the pharmaceutical and medical industries must comply with established standards and norms (EN 285 and ISO 17665) to ensure that their process continues to provide safe and sterile results.
In order to do so, autoclaves require periodic qualification and validation to prove that they can sterilize within their qualified parameters.
Food and Beverages
Cold Storage
Cold Storage is used to avoid further biological activity such as decay in food and medical products. The critical parameter during storage is temperature, but often humidity is also monitored for dry conditions.
Food and Beverages
Cooker Coolers
Continuous rotary cookers are used to heat, sterilize, and subsequently cool a range of canned goods such as fruit, vegetables, ready meals, soups, infant formulas, and dairy products. Temperature Distribution and Heat Penetration tests should be performed in each individual cooker/cooler and for every product and container.
Food and Beverages
Hydrostatic Retort
Hydrostats are a still steam retort used in the food industry for the thermal processing of goods stored in cans, trays, bottles and pouches. Typically, products will be sterilized at around 121.1˚C, though this can fluctuate depending on tower height and the product. Temperature and pressure are critical parameters, as products must be depressurised afterwards.
Food and Beverages
Pasteurization Tunnels
Tunnel Pasteurizers are used in the food industry for heat treatment of products such as beer, soft drinks and acid preserves (fruits, acidified vegetables or pickles) etc. that are kept in closed bottles or cans. Precise water temperatures must be reached to gradually heat the product in the bottle or can to pasteurization temperature, as well as to cool it down afterwards.
Food and Beverages
Retort Sterilization
Retort Sterilization in the food industry refers to any closed vessel or other equipment used for the thermal processing of foods. Typically, the sterilization temperatures vary from 110 to 135°C.
Both static and rotary steam/air retorts, and water immersion/cascade/spray retorts require temperature validation.
Ellab Applications
Ellab provides a wide range of diverse products and solutions for the pharmaceutical, medical and food industries all around the world.
See all applicationsSuitable Accessories
Ellab offers a wide range of customizable fittings and essential accessories for processes and studies within different industries. By using one of our unique fittings, loggers can be applied to hard-to-reach areas, cold spots and other critical measuring points.
Multi Reader Station
The TrackSense Pro Multi Reader Station is what starts, stops and reads Ellab’s data loggers. The light module can hold up to 4 data loggers at a time, or be extended through expansion modules to read 16 data loggers simultaneously.
The reader stations can be connected directly to the PC via USB or connect to larger-scale IT systems through the LAN connection, easily providing quick information and analysis wherever necessary.
Single Reader Station
The TrackSense Pro Single Reader Station allows for a simple and quick way of starting, stopping and reading data loggers.
The reader station can easily be connected directly to a PC, providing fast transfer of data to generate advanced analysis and reports
TrackSense Pro Micro Battery
Ellab offers various high-end batteries for our wide range of wireless data loggers.
Ellab Accessories
Ellab offers a wide range of customizable fittings and essential accessories for processes and studies within different industries.
See all AccesoriesDownloads and Related Articles
Our new corporate video shows why we are a world leading provider of validation, qualification and calibration solutions
