The data loggers can be used for various applications within the life science and food & beverage industries.
When used with our Bowie Dick Sensor, the following application(s) are covered:
For both
121 °C and 134 °C tests
Eliminates guesswork and
provides an objective result
ISO 11140-4 Compliant
TrackSense Pro X Wireless Data Logger
Bowie Dick Sensor
This highly compact Bowie Dick Sensor is the only electronic test device on the market designed for 121 °C processes – and, when necessary, 134 °C. The sensor provides far more insight into critical sterilization parameters than previously possible, making it a critical tool for any steam penetration study.
Unlike traditional chemical indicators, where you subjectively decide according to a change in color, this device provides you with an accurate report that eliminates any guess work.
The device is extremely easy to use and requires little to no training. With just a single click in the software, the unit will start to measure and record data. Once the Bowie Dick Test Program is done, the device is simply placed back in the reader station where the software automatically processes the data and provides a test result – simple and easy!
The high quality wireless TrackSense Pro X data loggers consist of high resistant stainless steel and offers high-end technology that allows for stable and highly accurate measurements within different thermal processes.
The TrackSense Pro X data logger series are equipped with an Interchangeable sensor option, unlocking several measuring parameters:
✓ Temperature
✓ Pressure
✓ Conductivity
✓ Relative humidity
✓ Vacuum
✓ Steam Penetration
The data loggers can easily be activated and read by the Multi reader station.
Sensor Options
Key Features and Benefits
Uniquely designed for both 121 °C and 134 °C tests
Accurate, reliable and cost efficient
Very compact size
User-friendly and intuitive software
Eliminates guesswork and provides an objective result
Replaceable PCD to run several cycles in a sequence
Verification of critical sterilization parameters
Sensor with this logger configuration:
Bowie Dick Sensor
ISO Standard Compliance:
11140-4:2007 type B1, B2 and B3 at 121 °C and 134 °C
3rd Party Test Institute:
SAL GmbH
Type of Sterilizers:
Steam Sterilizers / Autoclaves qualified for sterilization at 121°C or +134 °C according to EN 285 (volume larger than 60 L) and EN ISO 17665 (moist heat autoclaves)
Measuring Principle:
Piezoresistive / Electrical Resistance
Sensor Type:
Strain Gauge / Pt1000
Temperature Measuring Range:
0 to +140 °C (Calibrated +25 to +140 °C)
Temperature Accuracy: +25 to +140 °C:
± 0.05 °C
Temperature Response Time:
T-63%:
0.8 Second
T-90%:
1.7 Second
Pressure Measuring Range:
10 mBar to 6 Bar
Accuracy:
± 0.25% Full Scale (± 15 mBar)
PCD Housing Material:
PEEK
Logger with this sensor configuration:
Pro X 3G
Operating Temperature:
-20 to +150 °C
Operating Pressure:
0.001 mBar to 10 Bar ABS
House Material:
316L Stainless Steel
Diameter:
25 mm
Length:
100.2 mm including PCD (30 mm)
Weight With Battery:
208 g
Memory Capacity:
120,000 Data Points / 30,000 Samples
Minimum Sample Rate:
1 Second
Maximum Sample Rate:
24 Hours
Intrinsically Safe:
Ex II1GD Ex ia IIC T3 Ga, -60 °C ≤ Tamb ≤ +105 °C
Time Accuracy:
± 5 Seconds Per 24 Hours
Battery:
Please Note: If equipment is used in ATEX environment, special conditions for safe use stated in ATEX certificates section 17 must be considered.
The ValSuite® Software
ValSuite is the industry leading validation and calibration software, which is highly attributed to the countless reporting options, impenetrable data integrity, user-calibration options and data analysis features.
The software is used to run all Ellab hardware and can combine various measuring systems to the same study. In addition to its wide range of features, ValSuite is also FDA 21 CFR Part 11 compliant and designed in accordance with GAMP guidelines.
Features and Benefits:
✓ FDA 21 CFR Part 11 compliant
✓ Safe and reliable
✓ Windows security option
✓ Compatible with Windows 10
✓ Available in several languages
✓ Suitable for all sorts of applications
✓ Multiple reporting options
And much more…
Highlighted Features
One software platform for all Ellab equipment
Combine TrackSense data loggers and the E-Val Pro wired thermocouple system in the same session
Automatic PDF report generation with clear pass/fail indication
Can run from a stand-alone PC or networked
Suitable Applications
Life Science
Steam Sterlilization
Autoclaves in the pharmaceutical and medical industries must comply with established standards and norms (EN 285 and ISO 17665) to ensure that their process continues to provide safe and sterile results.
In order to do so, autoclaves require periodic qualification and validation to prove that they can sterilize within their qualified parameters.
Ellab Applications
Ellab provides a wide range of diverse products and solutions for most applications, all around the world.
See all applicationsSuitable Accessories
Ellab offers a wide range of customizable fittings and essential accessories for processes and studies within different industries. By using one of our unique fittings, loggers can be applied to hard-to-reach areas, cold spots and other critical measuring points.
Multi Reader Station
The TrackSense Pro Multi Reader Station is what starts, stops and reads Ellab’s data loggers. The light module can hold up to 4 data loggers at a time, or be extended through expansion modules to read 16 data loggers simultaneously.
The reader stations can be connected directly to the PC via USB or connect to larger-scale IT systems through the LAN connection, easily providing quick information and analysis wherever necessary.
Single Reader Station
The TrackSense Pro Single Reader Station allows for a simple and quick way of starting, stopping and reading data loggers.
The reader station can easily be connected directly to a PC, providing fast transfer of data to generate advanced analysis and reports
TrackSense Pro Standard Battery
Ellab offers various high-end batteries for our wide range of wireless data loggers.
The Standard Battery is used for most of the TrackSense data logger sizes and can be stored for up to 10 years and activated whenever needed using the activator unit.
Ellab Accessories
Ellab offers a wide range of customizable fittings and essential accessories for processes and studies within different industries.
See all AccessoriesDownloads and Related Articles
Our new corporate video shows why we are a world leading provider of validation, qualification and calibration solutions
